Mercedes-Benz S 4300 - Manual (Page 161)

160
Controls in detail
Control system
Convenience submenu
Access the CONVENIENCE submenu via the
SETTINGS menu. Use the CONVENIENCE sub-
menu to change the settings for a number
of convenience features. The following
functions are available:
Setting key-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel, the mirrors, and the automatic cli-
mate control should be stored separately
for each SmartKey (
୴ page 121).
̈ Move the selection marker with
the
æ or ç button to
the CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT .
The selection marker is on the current
setting.
̈ Press æ or ç to set key-depen-
dency to ON or OFF .
Activating easy-entry/exit feature
Use this function to activate and deacti-
vate the easy-entry/exit feature. When the
feature is activated, the steering wheel and
driver’s seat will move back to facilitate ex-
iting when you:
ț remove the SmartKey from the starter
switch or the KEYLESS-GO start/stop
button*
ț open the driver’s door
However, the engine must be turned off.
Function Page
Setting key-dependency 160
Activating easy-entry/exit fea-
ture 160
Setting parking position for exte-
rior rear view mirror 162
Setting fold-in function for exteri-
or rear view mirrors 162
Adjusting the drive-dynamic seat
(driver’s side) 163
Warning!
G
You must make sure that no one can be-
come trapped or injured by the moving
steering wheel and the driver’s seat when
the easy-entry/exit feature is in operation
and the driver’s door is being opened or the
SmartKey is removed from the starter
switch.