Netcommand ir setup menu, Language, Netcommand ir menu – MITSUBISHI ELECTRIC ws-55413 User Manual

Page 36: Netcommand ir device setup menu, Figure 12), Figure 13), Figure 14), Figure 12. setup menu, netcommand® ir, Figure 13. netcommand® ir menu, language, Figure 14. netcommand® ir device setup menu

Advertising

SETUP Menu: NetCommand® IR Setup, Language, IR

Device Setup Menus (WS-, WS-, WS-)

��
��

��

�� 

�

��

�

�� 

��

�� 

�

��

�� 

�

��

�� 

��
��

��

��

�

Figure 12. SETUP Menu, NetCommand® IR

��

MENU to return

��

�

��

��
��

�

��

�

�� 

��

��
��
��

Figure 13. NetCommand® IR Menu, Language

��

�

��

�

��

�

��

�

��

�� 

�

��

�

��

�

��

�� 

�

��

�

��

��

��

�

��

�

��

�

��

�

��

��
��

Figure 14. NetCommand® IR Device Setup Menu

NetCommand IR Setup Menu

(Figure 12)

For simple control with the Mitsubishi TV remote,

select the NetCommand IR SETUP from the

SETUP menu screen. There are  basic steps to the

NetCommand IR Setup:

1. Select the devices that are connected to the TV

(Net Command IR Device Setup Menu)

2. Have the TV learn the device’s remote control keys

(NetCommand IR [Device] Learn menu)

3. Select or change the Input(s) the device(s)

is (are) connected to

(NetCommand IR Input Assignment Menu)

Language

(Figure 13)

On initial set up, before you can use the

NetCommand IR Menus, the language for the menu

screens needs to be selected. Your choices are English

or Spanish (Español).

NOTE: This Language screen only appears on initial TV

setup. To change the language later, select Language from

the SETUP Menu screen (page ).

NetCommand IR Menu

(Figure 14)

Select NetCommand IR to start the TV learning

process.

1. NetCommand IR Device Setup Menu

(Figure 14)

Using the Adjust buttons, select Yes for each device

(AV Receiver, Cable, DTV, etc...) you have connected

to the TV. After selecting Yes, press ENTER to have

the WS-, WS- or WS- go to the

Learn menu to start learning the device.

NOTE: If you connect a cable box with an RF

output other than channel , please see the Channel

Edit Menu on page .

Advertising

This manual is related to the following products:

ws-48413