Maytag MAV-18 - Manual (Page 4)

If Auto Temperature Control is select-
ed with a Warm/Warm, Warm/Cold, or
Cold/Cold water temperature setting,
the light will illuminate during the first
fill.
MAV7450 Only – Auto Temperature
Control is activated automatically when
warm/warm, warm/cold, or cold/cold
water temperatures are selected.
3
USE
SUPER WASH – Can be used with any
wash cycle to clean very heavily soiled
items. Provides fast agitation and nor-
mal spin throughout all cycles.
GENTLE WASH – Can be used with
any wash cycle to provide a normal agi-
tation and slow spin. Use with delicate
items including those labeled “Hand
Wash.”
AUTO TEMPERATURE CONTROL –
Assures a cold water wash of 75° F and
Step 4 Select A
Customized Cycle
Press the appropriate button(s) to
select one or more options.
Step 5 Start Washer • Add detergent and any additives
• Add load and close lid
• Pull the control dial out to start
HOT/COLD – White and heavily soiled,
color-fast items
WARM/WARM – Delicate or colorfast
items
WARM/COLD – Moderately soiled,
colored items; most wrinkle free items
COLD/COLD – Brightly colored, lightly
soiled items; washable woolens
LOAD TYPE
REMEMBER: In wash water temperatures
below 65° F, detergents do not dissolve well
or clean well. Care labels define cold water
as up to 85° F.
Step 3 Select Water
Temperature
Press the appropriate button to select the
wash and rinse temperatures. Follow the gar-
ment care label for best results. Use the chart
at the right as a guide.
MAV7450 MAV7550
Control features vary by model.
CONTROLS AT A GLANCE
CONT.
warm water wash of 95° F. This option
assures detergent will dissolve and pro-
vide optimum cleaning results.
EXTRA RINSE – Provides an addition-
al rinse at the end of the cycle to more
completely remove laundry additives,
suds, perfume, etc.
NORMAL RINSE – Cancels the second
deep rinse. Provides only one deep
rinse.
CANCEL – Press this button to cancel
and reset any of the options.
SUPER
CANCEL