Motorola SATELLITE 9505 User Manual
Page 66
62
Using In-Call Features
You may see one of the following messages:
Cellular Mode
(GSM 900)
This feature is not available in GSM 900 cellular
mode.
Cellular Mode
(TDMA 800/1900)
(CDMA 1900)
(CDMA/AMPS)
To place a call on hold, you must send a phone
flash along with the appropriate feature code
provided by your service provider. To return to your
initial call, you must send another phone flash. For
instructions on how to send a phone flash, see
“Sending a Phone Flash” on page 66.
end call that is on
hold
Press
M
until you see
End Held
Call
, and then press
O
to select.
The held call is disconnected, the
current call remains connected,
and you see
End Call?
.
Message
Description
Trying
Your phone is attempting to switch
between the current and held call.
Hold
Failed
The attempt to hold a call was
unsuccessful.
Cannot Hold
Second Call
A call is already on hold. You can
only place one call on hold.
Reconnect
Failed
The held call could not be made
active again.
Busy
Try Later
Your phone is working on a
previous command. Wait a short
time before repeating the new
command.
If you want to...
Then...