Maytag MAF9501 - Manual (Page 17)

17
Water intake error
If F4 is flashing in the display.
Fault with water supply. Check:
- that the tap on the water pipe is open.
- that the filter in the machine’s water intake
is not blocked.
1. Shut off the water tap.
2. Unscrew the hose.
3. Clean the filter in the intake valve on the
machine.
4. Screw the hose back on.
5. Turn on the tap.
6. Run the programme again to check if the
fault is fixed.
7. If the fault remains, call the service divi-
sion.
Door opening error
If F6 is flashing in the display, call the
service division.