Motorola DCP 501 - Manual (Page 64)

5 4 O p e r a t i o n
DC P5 01 Us er Guide
* L E F T / R I G H T S E T U P *
X L E F T / R I G H T : L A R G E
D I S T A N C E : 1 0 f t
R E T U R N T O M E N U
* L E F T / R I G H T S E T U P *
L E F T / R I G H T : S M A L L
X D I S T A N C E : 1 0 f t
R E T U R N T O M E N U
21 Press SELECT or OK and the currently selected setting flashes. In this example, L A R G E
flashes. The L A R G E and S M A L L settings determine which speakers receive low frequency
(bass) information. Use the L A R G E setting for a speaker that is a traditional full-range
speaker capable of reproducing sounds below 100Hz. Use the S M A L L setting for smaller,
frequency-limited satellite speakers that do not reproduce sounds below 100Hz. When the
S M A L L setting is used, a subwoofer is required to reproduce low frequency sounds. Note
that L A R G E and S M A L L refer to the speaker’s ability to reproduce low frequency sounds
and not their physical size. Consult the manufacturer’s manual that accompanied your
speakers for more information.
On-screen Display DCP501 Display
22 Press CURSOR left/right (
<<<< >>>>
) to display L A R G E or S M A L L .
The speaker icon on DCP501 display changes with the L A R G E / S M A L L setting.
The settings for L E F T / R I G H T S E T UP are affected by your setting on the
S U B W O O F E R S E T U P menu
23 Press SELECT or OK to accept your selection and L A R G E or S M A L L stops flashing.
24 Press down arrow (
∨ ∨ ∨ ∨).
On-screen Display DCP501 Display
L A R G E
D I S T A N C E