MITSUBISHI ELECTRIC X100 - Manual (Page 9)

9
FINE, ADJUST, FOCUS/ZOOM and AUTO buttons
The operations of these buttons vary as follows depending on the modes selected:
Normal
On Menu
On PC
card Menu
PinP
EXPAND
FINE ( )
Adjust FINE (-)
Select the setting
item (Left)
Select the image
(Left)
–
Expand different
area (Left)
FINE ( )
Adjust FINE(+)
Select the setting
item (Right)
Select the image
(Right)
–
Expand different
area (Right)
º º º º º
Adjust FOCUS or
ZOOM (-)
Set or select the
setting (Down)
Select the image
(Down)
Switch still pictures
(main or sub)
Expand different
area (Down)
ª ª ª ª ª
Adjust FOCUS or
ZOOM (+)
Set or select the
setting (Up)
Select the image
(Up)
Switch still pictures
(main or sub)
Expand different
area (Up)
FOCUS / ZOOM
FOCUS or ZOOM
setting
Enter the layer
setting
Select the
directory (-)
Recapture of the
still image
Set the expand
rate (-)
AUTO
Adjust position
when incorrect
–
Select the
directory (+)
Select the input
source of PinP
Set the expand
rate (+)
ª , º
Use to make FOCUS or ZOOM adjustments.
menu
Use to project menu display. See pages 24~32.
fine ( , )
Use to make FINE adjustment.
PC card indicator
When the PC card is inserted, these indicators light up. See page 36.
focus / zoom
Use to change the mode of the
adjust buttons, focus or zoom.
auto
Use to adjust the position of
the image, when the position
is incorrect. See page 23.
MENU AUTO FINE
FOCUS
/ZOOM
ENTER
CARD1 CARD2