MidiLand 4060M - Manual (Page 3)

Check your S4 MidiLand™ 4060 S4 MidiLand™ 4060 packaging for the following items:
• Two (2) Satellite Speakers Satellite Speakers .
• One (1) Subwoofer Subwoofer with integrated 60W RMS power amplifier.
• One (1) CM-4 Control Module Control Module.
• One (1) 10 Feet, 15-Pin to 15-Pin Interface Cable Interface Cable (subwoofer to CM-4 control module).
• Two (2) 6 Feet and 8 inches, high performance Wire Speaker Cables Speaker Cables.
• One (1) 4 Feet, Audio Cable Audio Cable w/ 3.5mm to 3.5mm stereo male connectors.
• One (1) 2’ 15-pin to 15-pin flat Ribbon Cable Ribbon Cable with separate metal Slot Cover Slot Cover.
• Eight (8) non-marring, self-adhesive Rubber Feet Rubber Feet.
• Two (2) 4” self-adhesive control module Mounting Strips Mounting Strips.
• Four (4) Self-threading Screws Self-threading Screws for internal mounting of control module.
• One (1) AC Power Adapter
Your packaging may also contain other printed material with special offers for direct purchase of related multimedia products as well as optional MidiLand™
accessories.
Prepare the area where you will be installing your multimedia system.
Following are some tips you might want to consider:
1
2
SETUP
33
Select a location for the satellite speakers satellite speakers which is solid and places them an appropriate distance apart for good
stereo imaging (2-3’ apart if using on a desktop with your multimedia computer, personal stereo or mini-bookshelf
audio system; at least 3-4’ apart if using fairly close to a television set with your set top video game and at least 6’-
8” apart if using them in a home theater or traditional audio setup (i.e., when listening from across the room).
Featuring a dual angle elipsoidal design, the satellite speakers may be used in either of two (2) “tilt” angles simply by
turning the unit “upside-down”. The angle can be 15° or 25° to help raise the stereo image and improve focus and
clarity. The satellite speakers may also be wall mounted with optional bracket available separately from your dealer.
Select a solid location for the subwoofer subwoofer (generally on the floor) which allows adequate ventilation for the 60W RMS
Integrated Amplifier mounted in the rear of the subwoofer enclosure. To enhance bass performance, it is generally
advisable to place the subwoofer next to a wall or solid piece of furniture with the woofer/grille side pointing away from
the wall or furniture. You’ll probably want to experiment with several different locations once you’ve completed the
installation and hookup. Place 4 Rubber Feet
Rubber Feet under subwoofer to protect the mounting surface, if necessary.
If you choose to mount the control module control module internal to a computer, refer to illustration I-2 illustration I-2. However, if you
choose to mount the control module externally (i.e. the underside of your desktop, underneath your monitor, on top
of your desktop, etc.), we have supplied self-adhesive mounting strips or 4 Rubber Feet
Rubber Feet to secure/place the controls
wherever it is most convenient.
•
•
•
•