Motorola MD680 - Manual (Page 61)

59
Se
tti
ng
Up
Op
tion
a
l Ch
ar
g
ing
Ba
s
e
s
a
n
d Ex
p
a
n
s
ion
Ha
nd
se
ts
Personalizing and Using Expansion
Handsets
To personalize (set ring tones, time) expansion
handsets, refer to the instructions beginning on
page 21 of this user’s guide. To use expansion
handsets, refer to the instructions beginning on
page 28 of this user’s guide.
4 Press NEW ( a ) on the handset. The
ENTER BASE ID screen displays.
5 Using the keys on the handset, enter the
15-digit base ID code, then press
OK ( a ).
If you make a mistake while entering the
code, press the left soft key (
< ) to clear it.
Important: The base ID code may contain
numbers and characters such as #. Make
sure to enter all 15 numbers and
characters.
If ENTER BASE ID displays, 1 or more
characters were entered incorrectly. Re-
enter the base ID code.
Several screens display briefly, the handset
sounds a confirmation beep, and then
returns to the standby screen.
Action
4110W43o.book Page 59 Friday, July 25, 2003 8:33 PM