Motorola T7200 - Manual (Page 27)

Operating Y
o
ur T700
0-Series Radio
22
Note: Obstacles that block the signal path affect the strength of the incoming signal.
“Roger” Beeps/Talk Confirmation Tone
When you turn this feature On, your two-way radio transmits a unique tone when you
finish transmitting. It’s like saying “Roger” or “Over” and lets others know you’re
finished talking. If the person you are talking to does not hear the talk confirmation
tone, you can enable it by pressing and holding
] as you turn On your radio. Now,
whenever you release M , you let your friends know you’re finished talking by
transmitting a “Roger” Beep tone. “Roger” Beeps will be disabled as the
Default Setting.
Note: To toggle the Talk Confirmation Tone feature, turn your radio Off and then
back On while pressing and holding ] .
Button Beeps
Every time you press a button on the front of your radio, it beeps unless you turn
Button Beeps Off. To turn Button Beeps Off, turn your radio On while you press and
hold
[
. . To turn Button Beeps back On, turn the radio Off and then back On again
while you press and hold [
. . Button Beeps will be turned On, out of the factory. On
is the Default setting.
The w helps you determine when a radio is moving out of range
by displaying a receive signal-strength value next to the w while
you press and hold
J . This value from 0 (weakest) through 6
(strongest) indicates the relative strength of the incoming signal.
6864110R94.book Page 22 Friday, February 8, 2002 2:34 PM