Without vox accessories, Setting sensitivity levels – Motorola T7200 User Manual
Page 31
Ch
anging your Radio’
s Settings
26
\
Note: There is a short delay between when you start talking and the radio
transmits.
To order accessories, please refer to: www.motorola.com/talkabout
Without Accessories
•
Enable VOX by pressing M while turning the radio On.
•
VOX operation can be temporarily disabled by pressing M, g will flash.
•
A short press of M will re-enable VOX. g will be displayed (not flashing).
Note: There is a short delay between when you start talking and the radio transmits.
Setting Sensitivity Level
Adjusting your radio’s Sensitivity Level helps minimize the possibility of unintended
noises triggering a transmission, or enhances the ability to pick up quiet voices.
•
Press \ as needed to display g. The radio will also display the
sensitivity type you are setting:
?
= Microphone Gain
H
= External VOX (with audio accessory) - appears if a VOX-
capable audio accessory is inserted and VOX is enabled.
I
= Internal VOX (without accessory) - appears if internal VOX is enabled.
•
Select Sensitivity Level of1, 2, or 3 by using [ or ]:
3
= High Sensitivity, for quiet environments
2
= Medium Sensitivity, for most environments
1
= Low Sensitivity, for noisy environments
Note: There is a short delay between when you start talking and the radio transmits.
3
H
6864110R94.book Page 26 Friday, February 8, 2002 2:34 PM