Mr. Coffee SR10 - Manual (Page 6)

Model SRX55
Digital Clock Timer Coffeemaker
Important, Please Read Before First Use
n
THE CLOCK ON THIS MODEL MUST BE SET FIRST,
BEFORE THE COFFEEMAKER WILL OPERATE. Please refer
to setting the clock instructions, below.
Setting the Clock and Timer
PM INDICATOR
HOUR SET
advances cl
by the hour
S I G N A L - - -
indicates when
coffeemaker is
on
AUTO OFF LIGHT
indicates machine shut
needs to be reset
BREW SET
CONTROL. SWlTCH
by the minute
ON - OFF- AUTOMATIC
TO SET CLOCK
1. Move the CONTROL SWITCH to OFF
2. Plug the power cord into your electrical outlet. The display on the
clock will flash until you set the time.
3. Alternately press and hold the HOUR and MINUTE buttons until you
reach the current time. A red dot will appear in the upper left display
comer for PM time.
TO PRESET THE BREWING TIME
Simply press and hold the BREW SET button while setting the brew time
with the HOUR and MINUTE buttons. Please pay attention to PM INDICA-
TOR light.
TO AUTOMATICALLY BREW AT PRESET TIME
1. Follow steps #l through #5 in “How to Brew Coffee.”
2. Always slide the control switch to OFF and then to AUTO
3. Brewing will begin at the time you have preset and the coffee will
remain hot in the decanter for two hours. If more keep warm time is
needed, turn the switch to ON for an additional two hours keep warm
time.
6