Motorola B801 - Manual (Page 27)

Using the phone 27
3.3.19 Hold
You can place a HOME or CELLULAR call on hold. You will
hear an alert tone if you have not taken the call off of hold
after 14 minutes. You will hear another alert tone 30 seconds
later. At 15 minutes on hold, the call will automatically
disconnect.
To place a HOME call on hold:
• Press
the M key on the handset. HOME LINE HELD will
appear on the display and < will flash.
To resume a HOME call that is on hold:
• Press
< again.
To place a CELLULAR call on hold:
• Press
the M key on the handset. CELL LINE HELD will
appear on the display and I will flash.
To resume a CELLULAR call that is on hold:
• Press
the I again.
3.3.20 Temporary ringer silencing
Press > or / while the telephone is ringing to silence the
ringer temporarily. This will silence the ringer without
disconnecting the call. The next incoming call will ring
normally at the preset volume.
NOTE
Each handset will ring when there is an incoming call unless the
ringer volume is turned off. Pressing
> or / on one handset
will only silence the ringer of that particular handset.
3.3.21 Chain dialing
This feature allows you to initiate a dialing sequence from
numbers stored in the directory, caller ID history or redial list
while you are on a call. This feature is available only when
you are making a HOME call.
Chain dialing can be useful if you wish to access numbers
other than phone numbers (such as bank account
information or access codes) from the directory, caller ID
history or redial list.
Directory
1. Press P twice.
2. Press , to scroll to the desired number.
3. Press P to dial the displayed number.