Marantz PM-15S1 - Manual (Page 17)

13
ENGLISH
The buttons in groups , and . are for operating Marantz
products other than the PM-15S1, such as Super Audio CD
players and DVD players. The function of each button changes
to match the component selected as the input source from the
input selector buttons z.
When the CD button is pressed, the buttons in groups , and
. function as indicated in the table below. These buttons can
be used only when a Marantz Super Audio CD player is
connected to the CD input jacks.
Button Function
OPEN/CLOSE Open/Closes disc tray.
SOUND MODE
Selects Super Audio CD sound mode.
Selects Super Audio CD/CD.
3 3 3 3 3 Play
4 4 4 4 4 Track skip (Returns to track beginning/previous track.)
¢ ¢ ¢ ¢ ¢ Track skip (Advances to next track.)
1 1 1 1 1 Rewind search
¡ ¡ ¡ ¡ ¡ Forward search
8 8 8 8 8 Pause
7 7 7 7 7 Stop
RANDAM Random play
SCAN AMS (Automatic Music Scan) play
REPEAT Repeat play
TOP MENU/AM/A Not available for use
RETURN/FM/B Not available for use
MENU 1 2 Sets quick replay.
ENTER Starts quick replay.
3 /+ Not available for use
4 /– Not available for use
1 / L Not available for use
2 / R Not available for use
Button Function
OPEN/CLOSE Open/Closes disc tray.
SOUND MODE Changes sound mode.
3 3 3 3 3 Play
4 4 4 4 4 Track skip (Returns to track beginning/previous track.)
¢ ¢ ¢ ¢ ¢ Track skip (Advances to next track.)
1 1 1 1 1 Rewind search
¡ ¡ ¡ ¡ ¡ Forward search
8 8 8 8 8 Pause
7 7 7 7 7 Stop
RANDAM Random play
SCAN Selects search mode.
REPEAT Repeat play
TOP MENU/AM/A Displays top menu.
RETURN/FM/B Returns to previous menu
MENU 1 2 Displays menu screen.
ENTER Sets selected item.
3 /+ Moves cursor upward.
4 /– Moves cursor downward.
1 / L Moves cursor to left.
2 / R Moves cursor to right.
When the LINE 2 button is pressed, the buttons in groups ,
and . function as indicated in the below table. These buttons
can be used only when a Marantz DVD player is connected to
the LINE 2 input jacks.
NAMES AND FUNCTIONS OF PARTS
7 7 7 7 7 For use of Remote controller
• Loading batteries
Before using the supplied remote control unit for the first
time, load the batteries in the remote control unit. The
batteries provided are used to verify the operations of the
remote control unit only.
1. Remove the battery cover which is found on the back side
of the remote control unit.
2. Load the two new size “AAA” batteries inside the battery
compartment while taking care to align their polarities correctly
with the polarity markings (
with and with ).
3. Push the cover on the back side in the direction of the
arrow to close.
7 7 7 7 7 Operatable range of Remote controller
Operate the remote control unit (RC-11PMS1) within a
distance of approx. 5 m from the infrared signal reception
window (remote sensor) on the front of the PM-15S1.
• Caution
• Do not allow direct sunlight, an inverter fluorescent light or
other strong source of light to shine onto the player’s
infrared signal reception window (remote sensor).
Otherwise, the operation of the remote control unit may be
disabled.
• Bear in mind that operating the remote control unit may
cause other devices operated by infrared rays to be
operated by mistake.
• The remote control unit cannot be operated if the space
between the controller and the player’s remote sensor is
obstructed.
• Do not place any objects on top of the remote control unit.
Doing so may cause one or more buttons to be held down
which will cause the batteries to run down.
60 °
Approx. 5m
Remote control unit (RC-11PMS1)