Mattel UCREATE N9496 - Manual (Page 3)

3
Controls
1. On/Off & Volume Control: Turns mixer on or off and adjusts the master volume.
2. Record Button: Press the Record button to start/ stop recording and save to the mixer.
3. Record Input Select Switch: Selects MP3 or Microphone to record from. DJ HINT: Ensure
the switch is in the correct position before recording otherwise you may record from the wrong
source. You can only record one at a time.
4. FX & Filter Knob: Select from 8 different effects (FX) and fi lters to distort and manipulate your
music.
5. Hold Button: To maintain the effect of the Distortion Rocker.
6. Reset: Resets the memory.
7. BPM -/+ Buttons: Press – to decrease the tempo or + to increase the speed of the music. Tap
the to quickly set the speed. DJ HINT: Tap with the beat of a song from your MP3 player to
sync the speeds. Press and hold to return to default BPM.
8. Distortion Rocker: Press and move to manipulate the FX and/or fi lter to distort any “Linked”
loops. DJ HINT: Use the “HOLD” button to keep the distortion on even if you stop pressing the
Rocker.
9. Loops: Play and mute the different loops: Back Beats, Riffs, Licks, & Runs.
10. Link: Link Loops and recordings to the Distortion Rocker.
11. Recording A & B: Switch between recording A & B. DJ HINT: When the light is OFF recording
A will play. If the light is ON recording B will play. You can switch between A & B anytime.
12. Recording Play: Plays recording one time. DJ HINT: Press repeatedly to start recording again.
13. Recording Loop: Plays & mutes recording as a Loop.
14. Record Song Button: Press to record your composition up to 2.5min. DJ NOTE: You can only
record content currently stored in the mixer.
15. Play Song Button: Press to play back your recorded song.
2
On/Off &
Volume Control
Record Button
Record Input
Select Switch
Hold Button
Reset
Link
Recording A&B
Recording Play
Recording Loop
BPM -/+ Buttons FX & Filter Knob
Loops
Distortion
Rocker
Play Song
Button
Record Song
Button
1
7 4
2
3
5
6
9
10
11
12
13
8 15 14