Miele T 8422 C - Manual (Page 47)

Memory function
The electronics will memorise any
extra options selected for a
programme.
The duration selected for the timed
drying programmes will also be
stored in memory.
These settings will be selected
automatically the next time the
programme is chosen. You can either
accept these or change them by
pressing the appropriate button.
Follow steps A to F to programme
and store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up
constantly . . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
twice.
– The Low temperature indicator light
will briefly flash on and off six times.
–
P and 0 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with
P means:
0 Memory deactivated
(Default setting).
i Memory activated
(The Automatic indicator light will
also flash).
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
47