Multi-Tech Systems MT5634ZPX-PCI-U-NV - Manual (Page 12)

2 Installation
12
MultiModemZPX User Guide
Verifying the Windows 2000 Configuration
To verify your modem adapter configuration in Windows 2000:
1. Click Start | Settings | Control Panel. Double-click Phone and Modem Properties.
2. In the Phone and Modem Properties dialog box, click the Modems tab.
3. In the Modem tab, select Multi-Tech Systems MT5634ZPX-PCI-V92, and then click the
Diagnostics tab
and then click the Query Modem button to display information about your
modem settings.
Windows 2000 automatically configures Plug and Play devices such as the MultiModemZPX to
work properly with other devices installed in your computer.
Viewing System Resources
1. Click Start | Settings | Control Panel.
2. Double-click System, and then click the Hardware tab.
3. Click Device Manager.
4. Click the Action tab to display information about Device Manager options.
Removing Previous Modems from Windows 2000
1. To remove a modem adapter from Windows 2000, click Start | Settings | Control Panel. Double-
click Add/Remove Hardware.
2. The Add/Remove Hardware Wizard displays. Click Next.
3. When the Choose Hardware Task dialog box displays, select Uninstall/Unplug a device.
4. In the Choose a Removal Task dialog box, select Uninstall a device, and then click Next.
5. The Installed devices on your computer dialog box provides a list of devices installed on your
computer. Select the device you want to uninstall from the list. Click Next.
6. In the Uninstall a Device dialog box, verify that the correct device is highlighted, and then select
Yes
. Click Next to continue.
7. When the Completing the Add/Remove Hardware dialog box indicates Windows has successfully
uninstalled the device, click Finish.
Note: If you are removing a Plug and Play device from Windows 2000, you must physically
remove the device from the computer or Windows 2000 will request driver installation each time
the system starts.