MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC IMMERSIVE SOUND LCD HDTV SeriesLT-40151 - Manual (Page 49)

4. TV Menus 49
Initial, continued
Basic Screen
SoundPro
Mode
(153, 249 series) Auto START Perform Auto setup using the supplied calibration
microphone. See page 36.
Manual Custom To perform manual setup, see page 34.
Note: Do not perform manual adjustments after
running Auto setup. Doing so will erase all settings
created during Auto setup.
TV Location Center, Left, L
Corner, Right, R
Corner Highlight the item that best describes the TV’s loca-
tion relative to the wall. Required for Manual setup.
TV Wall Length
(in feet) [Enter digits] Press to change the number or enter digits.
Required for Manual setup.
Other Wall
Length (in feet) [Enter digits] Press to change the number or enter digits.
Required for Manual setup.
TV to Sofa
(in feet) [Enter digits] Press to change the number or enter digits.
Enter the distance from the TV to the primary seating
area. Required for Manual setup.
Custom
(all models) After defining the room layout, highlight Custom and press ENTER. Use this
option to fine-tune Sound Projector to your unique room layout. See details
on page 35.
Adjustments in the Custom Menu
Left Beam Angle
Right Beam Angle
Center Beam Angle
Left Surround Beam
Angle
Right Surround Beam
Angle
Left Level
Right Level
Center Level
Left Surround Level
Right Surround Level
Press • to select an
audio beam; colors of the
adjusters correspond to
audio beams in the on-
screen diagram.
Press
• to redirect the
audio beam or change the
sound level.
To reset these adjustments,
•
see “Resetting Angle and
Level Values in the Custom
Menu,” page 35.
Sound Projector
For full setup instructions, see page 34.
Controls in the SoundPro > Custom menu adjust the direction and
focus of the TV’s sound output.
At extreme beam angles, adjustment may be limited and the
image on screen may not accurately represent the sound beams.