Uninet imaging inc. • minolta – Minolta 5450 User Manual
Page 11
UNINET IMAGING INC. • MINOLTA
®
MAGICOLOR 5430 CARTRIDGE REMANUFACTURING INSTRUCTIONS
33. Once the two halves are assembled, continue installing the gear train and springs as shown.
REMOVING THE OEM CHIP
34. Locate the OEM chip on the inner portion of the end cap
(shown). The chip has been fastened with a minimal amount of
pressure and can be removed without tools.
ALTERING THE CHIP HOLDER
35. Before installing the replacement chip, a small adjustment
will need to be made to the chip holder shown. Two groove pat-
terns need to be cut out to accommodate the new chip.
Using a small cutting knife, cut out the two patterns as indicated
in the illustration.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
w w w.
u n i n e t
i m a g i n g . c o m / t e c h n i c a l . a s p
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • [email protected]
BEFORE
AFTER