Miele T 8822 C - Manual (Page 46)

Anti-crease setting
Anti-crease helps prevent creasing,
if laundry is not normally removed
immediately after the end of a
programme.
After the programme has finished, the
drum will continue to rotate at intervals
for:
– 2 hours (factory default setting).
– 1 hour.
It is a good idea to leave the
anti-crease function activated to help
prevent creasing for when it is not
possible to remove laundry immediately
after the end of the programme.
Follow steps
A to F to programme
and store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the jk button in.
Wait until the indicator light for the Start/
Stop button lights up constantly . . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
once.
– The Low temperature indicator light
will briefly flash on and off three
times.
–
P and 2 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with
P means:
0 Anti-crease deactivated
1 1 hour anti-crease
(The Automatic plus indicator light
will also flash once).
2 2 hours anti-crease
(The Automatic plus indicator light
will also flash twice).
(default setting)
E Pressing the Start/Stop button
switches from one number to
another.
F Switch the dryer off with the jk
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
46