Miele H 387-1 B KAT - Manual (Page 46)

Time left display
After a certain time the estimated resid-
ual time (i.e. the time left to run), ap-
pears in the oven display. The actual
core temperature is no longer visible
and cannot be called up.
The residual time is calculated from the
oven temperature selected, the re-
quired core temperature and the pat-
tern of the increasing core temperature.
The residual time figure first shown is
an estimate. As the cooking process
continues you may see the time left fig-
ure increasing. This is due to the elec-
tronics checking the core temperature
and readjusting the time left. This is
quite normal.
If, when the residual time is displayed:
– the oven or core temperature is al-
tered,
– or a different oven function is cho-
sen,
this will cancel all the residual time in-
formation, and the actual temperature
will reappear.
If the oven door is held open for some
time, the residual time will be recalcu-
lated.
Cooking time is completed automati-
cally.
Shortly before the end of cooking time
the oven heating switches off.
The Energy-save function (as de-
scribed under "Oven - use") comes into
action. The time left continues to be
shown in the display. If the "
p" button is
pressed, "
EC" appears.
If the oven temperature is altered or the
core temperature increased, the oven
heating will switch on again.
Roasting with the Roast Probe
46