Miele KFN 14943 SDE ED - Manual (Page 66)

The appliance doors can be aligned
with the appliance housing afterwards.
In the following figure, the appliance
door is not closed so that the
individual steps can be seen more
clearly.
Align the bottom door in the bottom
hinge bracket via the outer, elongated
holes:
^ Remove the middle screw a from the
hinge bracket.
^ Loosen the two outer screws b
slightly.
^ Align the appliance door by moving
the hinge bracket to the right or left.
^ Tighten the screws b; the screw a
does not need to be screwed on
again.
Align the top door via the elongated
holes in the middle hinge bracket:
^ Loosen the three screws c slightly.
^ Align the appliance door by moving
the hinge bracket to the right or left.
^ Tighten the screws c.
Aligning the appliance doors
66