Introduction, Connecting a usb interface, Introduction -3 connecting a usb interface -3 – Motorola SYMBOL LS9203 User Manual
Page 137
USB Interface
7-3
Introduction
This chapter covers the connection and setup of the scanner to a USB host. The scanner attaches directly to a USB host, or a powered
USB hub, and is powered by it. No additional power supply is required.
Throughout the programming bar code menus, default values are indicated with asterisks (
*
).
Connecting a USB Interface
Figure 7-1. USB Connection
The scanner connects with USB capable hosts including:
•
Desktop PCs and Notebooks
•
Apple™ iMac, G4, iBooks (North America only)
•
IBM SurePOS terminals
•
Sun, IBM, and other network computers that support more than one keyboard.
The following operating systems support the scanner through USB:
•
Windows 98, 2000, ME, XP
•
MacOS 8.5 and above
•
IBM 4690 OS.
The scanner will also interface with other USB hosts which support USB Human Interface Devices (HID). For more information on USB
technology, hosts, and peripheral de
.
To set up the scanner:
1.
Connect the USB interface cable to the rear of the scanner, as described in
Installing the Interface Cable on page 1-4
2.
Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of the IBM SurePOS
terminal.
Feature/Option
*
Indicates Default
*
North American, Standard USB Keyboard
USB Series A Connector
Interface cable