Motorola SYMBOL LS9203 - Manual (Page 292)

Symbol LS9203 Product Reference Guide 10-10
Scan Data Transmission Format
To change the Scan Data Transmission Format, scan the Scan Options bar code below. Then select one of four options:
• Data As Is
• <DATA> <SUFFIX>
• <PREFIX> <DATA>
• <PREFIX> <DATA> <SUFFIX>
When you have made your selection, scan the Enter bar code on page 10-12 . If you make a mistake, scan the Data Format Cancel
bar code on page 10-13 .
If you need to have a carriage return/enter after each bar code scanned, scan the following bar codes in order:
1. <SCAN OPTIONS>
2. <DATA> <SUFFIX>
3. Enter (on page 10-12 )
Scan Options
*Data As Is