Basic tv operation – MITSUBISHI ELECTRIC LT-55154 User Manual
Page 16
16
1. Basic Setup and Operation
For assistance call 1(800) 332-2119
Selecting an Input to Watch
Press
1.
INPUT.
Press
2.
and to highlight an input icon.
Sample Input selection menu, DVD input selected
Press
3.
ENTER to switch to the input.
To control the input device, use the device’s remote
4.
control or see “Introduction to Home-Theater
Control,” page 45.
Note: In most cases, to see a named icon for a con-
nected device (as in the samples), you must first
assign a name either
• When the device is first connected and the
New Device Found menu offers a choice
of names.
• By using the
Inputs > Name menu to
assign or change a name at any time after
the TV has detected the connection.
More About the Input Selection Menu
• To assign helpful names to the icons, see the
Inputs > Name menu, page 55.
• To remove unwanted Antenna, Bluetooth®, or HDMI
device icons from the
Input Selection menu, see
the
Inputs > Name menu, page 55.
• To rearrange the icons, see the
Inputs > Order
menu, page 56.
Basic TV Operation
Watching Broadcast TV
TV Connected to an Antenna or Direct Cable
Service (no cable box)
Note: Perform channel memorization to enable recep-
tion of digital channels. See page 14.
Press
1.
INPUT to display the Input Selection menu.
Highlight the antenna or cable icon and press
2.
ENTER.
Sample Input Selection menu, antenna input selected
To tune to a
3.
channel from the
ANT input, use any of
these methods.
Enter the channel number using the number
•
keys on the remote control and press
ENTER.
For a two-part digital channel, such as 3-1,
press
3 —
CANCEL 1 ENTER .
Press
•
CH to change channels one channel at a
time.
Press and hold
•
CH to speed through channels.
Press
•
LAST to return to the previous channel.
Use the Fav (Favorites) feature to tune to up to
•
nine favorite channels. See page 29.
Press
•
GUIDE to display ChannelView channel
listings, highlight a channel number, and press
ENTER to tune.
Set up ChannelView custom channel banks
•
and use the
CH / key to tune to predefined
groups of channels. See page 30.