Operating netcommand-controlled devices, continued – MITSUBISHI ELECTRIC LT-55154 User Manual
Page 65
5. NetCommand IR Control (265 Series)
65
For assistance call 1(800) 332-2119
Key Name in
Learning Screen
Special Operation Description and Setup
How to Use
Enter (digits) When ENTER is for channel changes, i.e., the origi-
nal remote control has a separate
ENTER key for
this function):
Learn the
ENTER key for channel selection in
the NetCommand
Enter (digits) learning posi-
tion. Use this learning position only if the original
remote control has separate keys for
Enter in
menus and
Enter for channel selection.
Press digit key(s) and then press
ENTER.
NetCommand will send the
Enter signal for
channel selection.
Cancel
CANCEL as the Cancel or Exit Function
“Learn” the
Cancel or Exit function in the
NetCommand
Cancel learning position
Press
1.
MENU or GUIDE to display the menu or
guide.
Press
2.
CANCEL and NetCommand will send
the
Cancel or Exit signal.
—
(separator)
The symbol “—” can serve as the separator
between a digital channel’s main and sub-channel
digits, e.g., digital channel 12-1 (main channel is
12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand
– (separator) learning position.
Press digit key(s) and press
CANCEL.
NetCommand will send the channel-separator
signal.
Operating NetCommand-Controlled Devices, continued