Multi-Tech Systems MT5600BA-V.92 - Manual (Page 28)

Chapter 3 – Using the Front Panel
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
28
Caller ID Options
Press the Æ and Enter buttons to enable formatted (FCID) or unformatted (UCID) Caller ID or to
disable Caller ID altogether. Same as the +VCID=0, +VCID=1, and +VCID=2 commands.
Note: Because Caller ID information is sent between the first and second ring, register S0 must be
set to 2 or more rings for the modem to receive Caller ID information.
Region Select Options
Note: See page 21.