MITSUBISHI ELECTRIC PD-5050 - Manual (Page 13)

4
��������������
�� POWER ON/STANDBY
Switches the power to ON or STANDBY mode.
(These buttons do not operate when POWER/
STANDBY indicator of the main unit is off.)
� SLEEP
Press this button to activate the off timer.
� INFO
Displays the source settings on the screen.
� FORMAT
Automatically detects the signal and sets the aspect
ratio. FORMAT button is not active for all signals.
� MENU/ENTER
Press this button to access the Menu.
Press this button during the display of the main menu
to go to the sub menu.
� ADJUST (� / � /
� �
/
�
)
Use these buttons to select items or settings and to
adjust settings or switch the display patterns.
� EXIT
Press this button to exit the MAIN MENU. Press this
button during the display of the sub menu to return to
the previous menu.
� MUTE
Press this button to mute the audio.
� VOLUME ( )
Press this button to adjust audio volume.
�� ZOOM ( )
Press this button to enlarge or reduce the image.
�� CONTRAST
Press this button to adjust contrast directly.
�� BRIGHTNESS
Press this button to adjust brightness directly.
�� PICTURE MODE
Press this button to adjust picture mode directly.
�� COLOR TEMP
Press this button to adjust color tone directly.
�� INPUT1, 2, 3
Press one of these buttons to select INPUT1 or INPUT2
or INPUT3 as the source.
INPUT 1-3 can also be selected using the INPUT/EXIT
button on the front panel of the display.
�� COMP1, 2
Press one of these buttons to select COMP1 or COMP2
as the source.
COMP 1-2 can also be selected using the INPUT/EXIT
button on the front panel of the display.
�� MONLINK
Press this button to select MONLINK/HDMI as the
source.
�� PC/RGB
Press this button to select PC/RGB as the source. PC/
RGB can also be selected using the INPUT SELECT
button on the display.
�� PICTURE MEMORY
Switches sequentially between picture memory settings
1 to 6
�� Remote control signal transmitter
Transmits the remote control signal
�����
������
������
�������
�������
�������
������
������
������
�������
����
4