MITSUBISHI ELECTRIC PD-5050 User Manual

Page 32

Advertising
background image

23

�����������

RGB SELECT modes

One of these 7 modes must be selected in order to

display the following signals correctly.

AUTO: Select the suitable mode for the specifications

of input signals as listed in the table “Computer input

signals supported by this system” on page 7 of Model

Information.

STILL: To display VESA standard signals. (Use this

mode for a still image from a computer.)

MOTION: The video signal (from a scan converter) will

be converted to a RGB signal. This makes the picture

more easily viewable. (Use this mode for a motion

image from a computer.)

WIDE1: When a 852 dot� 480 line signal with a

horizontal frequency of 31.7kHz is input, the image may

be compressed horizontally. To prevent this, set RGB

SELECT to WIDE1.

WIDE2: When a 848 dot� 480 line signal with a

horizontal frequency of 31.0 kHz is input, the image

may be compressed horizontally. To prevent this, set

RGB SELECT to WIDE2.

WIDE3: When a 1920 dot� 1200 line signal with a

horizontal frequency of 74.0 kHz is input, the image

may be compressed horizontally. To prevent this, set

RGB SELECT to WIDE3.

DTV: Set this mode when watching digital broadcasting

(480P).

See page 7 of Model Information for the details of the

above settings.

Setting the signal and black level for HDMI signal

Choose the signal for the HDMI connector (PC or STB/

DVD) and set the black level.
Example: Setting the “PLUG/PLAY” mode to “STB/DVD”
Press MENU/ENTER buttons to access the MAIN MENU.

Use the

�� �

����

buttons to select the SET UP menu and

then press the MENU/ENTER button.

Use the ����buttons to select the HDMI SET UP setting.

Use the

� ���

buttons to change the HDMI SET UP setting.

����

����

���� ������

�����������

���������
�����������

����������
�������

�����������

PLUG/PLAY settings

PC: When connected to the PC signal.

BLACK LEVEL is set to “LOW” automatically.

STB/DVD: When connected to the SET TOP BOX,

DVD etc.

BLACK LEVEL is set to “HIGH” automatically.

BLACK LEVEL settings

LOW: When connected to the PC signal.

HIGH: When connected to the SET TOP BOX, DVD

etc. Change “HIGH” into “LOW” if the black level

appears gray.

Setting the video signal format

Use these operations to set the color systems of composite

video signals or Y/C input signals.
Example: Setting the color system to “3.58 NTSC”

����

����

���� ������

������

��������
���������
���������
����������
�����������
������������
�����������
����������
�����
������������
�����������
���������

����������
������������
��������
�������

�����������
�������
����
������
�����
�����������
������

�����������

Video signal formats

Different countries use different formats for video signals.

Set to the color system used in your current country.

AUTO: The color systems are automatically identified

and the format is set accordingly.

PAL: This is the standard format used mainly in the

United Kingdom and Germany.

SECAM: This is the standard format used mainly in

France and Russia.

4.43 NTSC, PAL60: This format is used for videos in

countries using PAL and SECAM video signals.

3.58 NTSC: This is the standard format used mainly

in the United States and Japan.

PAL-M: This is the standard format used mainly in

Brazil.

PAL-N: This is the standard format used mainly in

Argentina.

Setting the background color when no signal

is being input

Set the background color to black.
Example: Setting “BACK GROUND” to “BLACK”
Press MENU/ENTER button to access the MAIN MENU.

Use the

�� �

����

buttons to select the SET UP menu and

then press the MENU/ENTER button.

Use the ����buttons to select the BACKGROUND setting.

Use the

� ���

buttons to change the BACKGROUND color.

����

����

���� ������

������

��������
���������
���������
����������
�����������
������������
�����������
����������
�����
������������
�����������
���������

����������
������������
��������
�������

�������
��������
����
������
�����
�����������
������

�����������

BACK GROUND Settings

BLACK: Sets the background color to black.

GRAY: Sets the background color to gray.

Setting this makes it easier to see that there is no signal.

��

�����������

�����������������

���� ��� ������ �� ������ ����� ��� ��������� ��� ������ ��
����������������������������������������
�����������������������������������������������������
�������������������������������������������������������
����������������������������������������������������
������������
������ �������������������������������������������
����������������������������������������
������������ ������ ������� ������ �� ����� ����������
����������������������������������������������������
����� ������� ���������� ����� ����� ����� ���� �� ������
�����������������������
������������ ��� ���� ����� ���� ����� ������� ����� �
�������������������������������������������������������
����������������������������������������������������
����������������
������������ ��� ���� ����� ���� ����� ������� ����� �
����������������������������������������������������
����������������������������������������������������
��������������������
������������������������������������������������
����������������������������������������������������
����������������������������������������������������
��������������������
�����������������������������������������������������
�������
������������������������������������������������������
���������������

���������������������������������������
��������������������
��������������������������������������������
�������������������������������������������������
��������

� ���

��������������������������������������

���������������������������������
��������

� �

�������������������������������������������

����

����

���� ������

�����������

�����������

�������

�����������

���������������������

�������������������������������������
��������������������������������������������
����� ������� ������� ����� ������ ��� ���� ������ �����
�������������

�������������������������������
����������������������������������������������������������
�����������������������������������
������������������������������������������������
��� ������� �������� ��� ����� ���� ������ ������
�����������

����

����

���� ������

������

��������
���������
�����������
���������
����������
����������
������������
�����������
����������
�����
�����������
��������
���������

����������
������������
������
��������
�������

�����������
�������
����
������
�����
�����������
������

�����������

���������������������

������������������������������������������������������������
�����������������������������������������������������
����������������������������������������������������
����������������������������������
���������������������������������������������������
���������������������������
�������������������������������������������������
������������������
���������������������������������������������������
��������������������������������������������
��������������������������������������������������
�������������������������������
������������ ��� ���� ��������� ������� ����� ������� ��
�������
������� ����� ��� ���� ��������� ������� ����� ������� ��
����������

�������������������������������������������

��������������
������������������������������������������������������
��������������������������
�����������������������������������������
��� ������ �������� ��� ����� ���� ������ ������
��������

����

����

���� ������

������

��������
���������
�����������
���������
����������
����������
������������
�����������
����������
�����
�����������
��������
���������

����������
������������
������
��������
�������

�������
��������
����
������
�����
�����������
������

�����������

���������������������

������ �����������������������������������
����������������������������������������
������������������������������������������������������������

Advertising