Melissa 145-017 - Manual (Page 19)

18 19 18 19
KEY
1. Water reservoir cover
2. Water reservoir
3. Water level gauge (on glass pot)
4. Filter holder
5. Handle
6. Anti-drip valve
7. Hotplate (beneath glass pot)
8. Control panel with display and
buttons
9. Glass pot (with lid)
10. Water level gauge (on reservoir)
11. Power cable and plug
12. Measuring spoon (not visible on
picture)
a. Start/stop button
b. "AUTO" button (timer function)
c. "PRO" button (timer)
d. Timer indicator
e. "MIN" button (minutes)
f. Display
g. "HR" button (timer)
h. Start/stop indicator
PRIOR TO FIRST USE
• Read the safety instructions
through carefully.
• Ensure that the cord is fully
extended.
• Clean glass pot (9) in soapy water.
• To rinse the appliance through,
pass a potful of water through the
machine before using it for the first
time.
o Follow the instructions in
"Operating the appliance", but
WITHOUT using a filter or
coffee.
SETTING THE TIMER AND START
TIME
The appliance has a built-in timer. You
can use this to set the appliance to
start at a given time (see "Operating
the appliance").
NOTE: The timer will require resetting
each time the appliance has been
disconnected from the mains. Reset
the time when reconnecting the
appliance.
Setting the clock
• Place the plug (11) in the socket.
The clock on the display (f) will
show "12:00" and flash.
• Press the "PRO" button (c) once.
The display will show "SET TIME"
in the top left corner.
• You can now set the time using the
HR (g) button for hours and MIN (e)
button for minutes.
• Setting will stop automatically
when you have not pressed any
button for approx. 8 seconds. The
clock has now been set.
Setting start time
• Press the "PRO" button twice. The
display will show "SET TIMER" in
the top right corner.
• You can now set the start time
using the HR (g) button for hours
and MIN (e) button for minutes.
• Setting will stop automatically
when you have not pressed any
button for approx. 8 seconds. The
start time has now been set.
OPERATING THE APPLIANCE
Regardless of whether you want
to make coffee with or without the
time, the start procedure is always as
follows:
• Pour fresh water into the glass pot.
• Lift the cover (1) of the water
reservoir, and carefully pour the
water from the glass pot into the
reservoir (2).
• Close the pot lid, and place it
on the hot plate (7). Check it
is correctly positioned, so that
the anti-drip valve (6) is pressed
upwards and is opened.