Motorola WR850G - Manual (Page 24)

INSTALLATION SECTION 2
SECTION 2, INSTALLATION 2-9
3 To connect the PC to the router through a wireless connection,
ensure the PC’s wireless adapter SSID (Service Set Identifier) is
set to the router’s default setting of motorola appended with the
last 3 characters of the Wireless MAC address (an example
SSID: motorola 345) and that no encryption is enabled.
FO R HO ME O R OFF ICE USE
Tested To Comply With FCC Standards
MODEL: WR850G
INPUT VOLTAGE: +5VDC, 2A
FCC ID: F2NWR850G
MODEL WR850G
PART NUMBER: AAAAAA-BBB-CC
S/N: PPPPMMYJJJSSSSSCAABBCCCC
WIRELESS MAC: AB CD EF 01 23 45
WAN MAC: AB CD EF 01 23 45
MADE IN TAIWAN
INPUT VOLTAGE: +5VDC, 2A
FCC ID: F2NWR850G
FOR HOME OR OFFICE USE
Tested To Comply With FCC Standards
MODEL: WR850G
WIRELESS MAC: AB CD EF 01 23 45
WAN MAC: AB CD EF 01 23 45
MADE IN TAIWAN
MODEL WR850G
PART NUMBER: AAAAAA-BBB-CC
S/N: PPPPMMYJJJSSSSSCAABBCCCC Wireless MAC address
Refer to your device’s documentation for instructions on how to
activate these settings.
4 To configure the router, refer to Section 3:Configuration.
You have now completed the hardware installation. The next section,
Configure Your Computers, steps you through the various
configuration options needed for your PCs.
Configure Your Computers
Each computer that is going to be part of your network needs to “talk”
to the router. To do this, you may need to configure each PC’s
network setting to automatically obtain an IP address. This section
includes information on configuring computers with the following
operating systems:
! Windows 98SE
! Windows ME
! Windows 2000
! Windows XP
Determine the operating system for each computer you are including
in your wireless network and follow the steps to configure the network
settings for that PC.