Motorola WR850G - Manual (Page 48)

SECTION 3 CONFIGURATION
3-14 SECTION 3, CONFIGURATION
Field Description
Key Input Method Unavailable if WPA is selected. The options
are:
! Pass Phrase
! Hexadecimal
! ASCII
If you select either Pass Phrase or
Hexadecimal, in Key Content, the format of the
Key appears in a hexadecimal format.
If you are using other non-Motorola wireless
products and a security algorithm other than
WPA-PSK, you must enter your WEP keys
manually for the non-Motorola wireless
products.
Select the option that best matches your needs.
The default is Pass Phrase.
Pass Phrase Enter the Pass Phrase to be used for Key
encryption. Remember this Pass Phrase so
that you can enter the same phrase for the
Motorola client devices on your wireless LAN.
You will use this Pass Phrase when using WPA
security with your client devices. Pass Phrase
must be between 8 and 63 characters.
Key Length Only available when ESS mode is set to PSK
and the Encryption Status is set to None. The
option selected determines the strength of the
key.
There are two options:
! 128-bit
! 64-bit.
Select the option that best matches your needs.