Optimuspda sp5700 series user manual – Metrologic Instruments SP5700 Series User Manual
Page 21
Version 2.0
OptimusPDA SP5700 Series User Manual
Copyright © 2007
29 March 2007
Metrologic, Inc.
21
•
Tap once on
at the bottom of the screen (see Picture 14). A keyboard should now
appear. If this is not the case, press
until a drop-down menu appears. Then select
Keyboard. Picture 15 shows the keyboard panel.
Picture 14 Keyboard Icon
Picture 15 Keyboard Panel
•
With the keyboard display visible on the lower part of the screen, tap the buttons with
characters to enter text into your document.
Note: You can also use the PDA’s keyboard to input characters. The keyboard uses a
numeric keypad that recognizes numbers (0~9). The keypad is color-coded to indicate
particular actions that are taken when the Shift key is being pressed.