Installing the belt clip – Motorola H01UCC6DU3AN User Manual
Page 14
Getting Started
13
Belt Clip Installation and Removal (on Nickel-
Cadmium Batteries Only)
Installing the Belt Clip
1. Insert a pencil or equivalent size instrument between the in-
side of the belt clip and the metal clip assembly to hold the metal
clip partially sprung (metal clip should be approximately parallel
with the plastic portion of the belt clip).
2. Align the metal tabs of the belt clip with the plastic slots of the
battery housing.
3. Slide the belt clip onto the battery, pushing firmly until you
hear a click.
4. Remove the pencil from the clip.
!
Caution
Installation and removal of the belt clip assembly
should be done with the battery removed from the
radio or damage could be done to the radio
housing.
MAEPF-22060-A
A
Revised Belt Clip
JWB
5/27/93
EH
5/27/93
MAEPF-22061-A