Maytag MDC1305AAW - Manual (Page 11)

Control panel and indicator lights
Programme Selector – Select the required programme
On Off button and indicator – Press to switch on, the indicator will light
Start Reset – Press to commence the selected drying programme. Press for
5 seconds to cancel/reset the programme
Acrylics Synthetics button – Press to reduce the heat level for delicate items,
the indicator above the button will light up. To change the heat setting the
programme must be reset
Low Heat – Indicator light ON
High Heat – Indicator light OFF
Empty Water indicator – lights when the water container is full
Filter Care indicator – lights when the filter needs cleaning
COUNTDOWN display
START – When the dryer is switched On the START indicator will flash, when
the programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion
of the programme
15' - Indicator lights when there is less than 15 minutes left until completion
of the programme. At this stage of the drying cycle the machine enters the
Cool Down phase
END - Indicator lights when the programme is finished.
11
Controls and indicators
ACRYLICS
SYNTHETICS
BUTTON
ON OFF
BUTTON
FILTER CARE
INDICATOR
EMPTY
WATER
INDICATOR
PROGRAMME
SELECTOR
START RESET
BUTTON
COUNTDOWN
DISPLAY
40002643.qxd 03/03/2005 19:42 Page 11