Metrologic Instruments MS7220 User Manual
Page 32
29
D
ESIGN
S
PECIFICATIONS
MS7220 D
ESIGN
S
PECIFICATIONS
O
PERATIONAL
Light Source:
VLD 650 ± 10 nm
Laser Power:
0.678 mW maximum
Depth of Field:
0 mm to 215 mm 8.5" at default (programmable)
Scan Speed:
2000 scans/second
Scan Pattern:
5 fields of 4 parallel lines (omnidirectional)
Scan Lines:
20
Min Bar Width:
0.13 mm (5.2 mil)
Decode Capability:
Autodiscriminates all standard bar codes; for
other symbologies call Metrologic
System Interfaces:
PC Keyboard Wedge, RS-232, OCIA, Light Pen,
Stand Alone PC Keyboard
Print Contrast:
35% minimum reflectance difference
No. Characters
Read:
up to 80 data characters(Maximum number will
vary based on symbology and density)
Roll, Pitch, Yaw:
360°, 60°, 60°
Beeper Operation:
7 tones or no beep
Indicators (LED):
green = laser on, ready to scan
red = good read, decoding
M
ECHANICAL
Height:
123 mm (4.8")
Depth:
65mm (2.6")
Width:
168 mm (6.6")
Weight:
0.91 Kg (2 lbs)
Termination:
Four 10-pin modular RJ45 Jacks
Cable:
Standard 2.1m (7’) straight; optional 2.7m (9')
coiled; for other cables call Metrologic
Specifications subject to change without notice