Metrologic Instruments MS7220 - Manual (Page 40)

37
MS7220 S TANDS
Vertical Stand Kit [ MLPN 46-46405 ]
See page 37 for installation instructions.
Kit Includes:
a. #8 x 1 round head wood screw [ MLPN 18-18057 ] Qty. 4
b. M3 x .5 x 6mm pan head screw [ MLPN 18-18670 ] Qty. 3
c. Vertical base cover [ MLPN 36-00363 ] Qty. 1
d. Cable door [ MLPN 18-18057 ] Qty. 2
Tools required for installation:
•
Flat head screw driver
• Phillips head screw driver
• ¼”-20 wrench
• Drill with #39 drill bit (Needed for hard mount installation only)
Optional Flex Stand Kit [ MLPN 46-46404 ]
See page 38 for installation instructions.
Kit Includes:
a. Long coupler [ MLPN 36-00324 ] Qty. 1
b. Bearing plate [ MLPN 36-00501 ] Qty. 1
c. Bellows [ MLPN 36-36615 ] Qty. 1
d. Flex pole [ MLPN 36-00351 ] Qty. 1
e. ¼ -20 x 3/8 pan head screw [ MLPN 18-18602 ] Qty. 1
Tools required for installation:
• Flat head screw driver
• Phillips head screw driver
• ¼”-20 wrench
• Drill with #39 drill bit (Needed for hard mount installation only)