Marantz SM-1151 - Manual (Page 12)

6
ENGLISH
NAMES AND FUNCTIONS OF PARTS
A UNBALANCED INPUT Jack
These jacks are for connecting to the unbalanced output
jacks of a control amplifi er. In BTL mode, the Lch input
terminal is used.
B BALANCED INPUT Jacks
These jacks are for connecting to the balanced output
jacks of a control amplifi er. In BTL mode, the Lch input
terminal is used.
C SPEAKER SYSTEMS Output Terminals
These jacks are for connecting to a speaker system.
You can connect 2 speaker systems to the SM-11S1,
SPEAKER SYSTEM 1 and 2. Speaker output can be
turned ON/OFF from the SPEAKERS 1 / 2 buttons on
the front panel.
When using BLT mode, connect the speaker + side to the
Lch + jack, and the speaker – side to the Rch + jack.
D REMOTE POWER CONTROL Jacks
(TRIGGER IN)
This jack controls this unit’s power ON/OFF in sync with
the Marantz SC-11S1 control amplifi er ON/OFF control.
Connect to the SC-11S1 TRIGGER OUT jack using a
commercially available cable.
For more information on
REMOTE POWER CONTROL ,
see pg. 20.
E REMOTE POWER CONTROL ON/OFF
Switch
ON: Set to control this unit’s power ON/OFF in sync with
the Marantz SC-11S1 control amplifi er ON/OFF
control.
OFF: Set to use the POWER ON/OFF switch on the
front panel of the unit to switch the unit’s power
ON/OFF.
F AC IN Power Cable Connection Socket
Connect this socket to the power outlet using the included
power cable.
G AMP MODE Switch
STEREO: Set to use the SC-11S1 as an ordinary stereo
power amplifi er.
BTL: Set to connect a stereo amp by BTL and use
this unit as a monaural power amp.
For more information on AMP MODE , see pg. 19.
Caution:
Always make sure that the power is OFF before
switching this switch.
AC IN
ON
OFF TRIGGER IN
REMOTE POWER CONTROL
MODEL NO. SM-11S1
R CH L CH
R CH L CH
R L STEREO
UNBALANCED INPUT
BALANCED INPUT
AMP MODE
BTL
BTL
L R
BTL
SPEAKER SYSTEMS
1
2
BTL 3 3
1 1 2 2
3 3
1 1 2 2
PUSH PUSH PUSH PUSH
A B C
G F
D E
REAR PANEL