Mega System Tech iCV-02 - Manual (Page 36)

iCAMView user manual -33-
Chapter 5: iCAMView Web Manager
Fig.29. iCAMView Event Selection List
By default, all the events are selected; you must click “Apply” to activate them.
Close the window to return to the Event Notification Page. Click “Apply” to
save your settings.
iCAMView will send you the following email notification depending on which
event you have selected.
Note: The image recording and motion detection notification function here will
send an email notification WITHOUT any pictures attached. For email
notification with images, the administrator has to setup the Image Recording
Page and Motion Detection Page under Advanced Settings.
Samples;