Mega System Tech iCV-02 - Manual (Page 47)

iCAMView user manual -44-
Chapter 5: iCAMView Web Manager
This section is to manually set iCAMView System Time. The format is
pre-determined to: yyyy/mm/dd hh:mm:ss. Click “Manual Adjust” to save any
manual changes.
ii. System Restart
Fig.42. Auto Restart setting
“Auto Restart System Every”
The administrator can choose to restart iCAMView at certain intervals (choose
between minutes and hours only). This will ensure that iCAMView will work
smoothly. Click “Apply” to save changes.
“Manual Restart”
Click “Restart Now” to restart the system immediately.
iii. LED Settings
“LED function”
The administrator can enable or disable the LED (except the Power LED) on
iCAMView here. Click “Apply” to save settings.
iv. SNMP Settings
”System Name”
This is to give iCAMView a name identifiable in a SNMP network.
“System Contact”
This is to give the administrator a name.
“System Location”
This is to set iCAMView location.