Muratec F-114 Series - Manual (Page 22)

G
ETTING
S
TARTED
1.9
1
Handset and Handset Cradle
1
Plug the end of the coiled cord of the handset into the jack
on the left side of your machine.
2
Holding the cradle as shown, attach the handset cradle to
the machine.
➀
Insert the two tabs of the cradle into the slots on the left
side of the machine as shown.
➁ Push the cradle toward the machine until it locks into
place.
N
OTES
:
• The cradle and handset must be installed for correct operation of the set.
• To remove the cradle, push it down,
pressing the latch on the
bottom of the cradle .