Muratec F-114 Series - Manual (Page 97)

S
CANNING
5.2
Scanning Basics
Your machine offers two ways to scan:
• From the SmarThru software: Launch
SmarThru and open the Scan Wizard to begin scanning. See
below.
• From TWAIN-compliant software: You can use other software
including Adobe PhotoDeluxe and Adobe Photoshop. See
page 5.6.
N
OTES :
• To scan with your machine, you must install the MFP driver.
• Scanning is done through the same LPT or USB port currently
assigned for your printer port.
Scanning Using SmarThru
Samsung SmarThru is the accompanying software for your
machine. With the SmarThru, scanning becomes a pleasure.
Follow these steps to start scanning using the SmarThru:
1
Make sure that your machine and computer are turned on
and properly connected to each other.
2 Pull the document input support all the way out. Fold out
the extender, if necessary.