MITSUBISHI ELECTRIC LVP-S120A - Manual (Page 17)

17
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select OPTION menu.
3. Press the ENTER button (or { or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the
$ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, simultaneously
press the MENU and POWER buttons.
• The input source can not be changed when the
MENU selection bar or MENU is displayed.
• The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
PICTURE CONTRAST ± 10
BRIGHTNESS ± 10
COLOR TEMP STANDARD
HIGH
LOW
USER
TINT
±
10
COLOR ± 10
SHARPNESS
±
10
CONTRAST R
±
10
CONTRAST B ± 10
BRIGHTNESS R ± 10
BRIGHTNESS B
±
10
PRESENTATION ZOOM MODE 1 - 4
POSITION 1 - 4
AUTO SLIDE TIME 3 - 99sec
REPEAT ON/OFF
INSTALLATION IMAGE REVERSE OFF/MIRROR/INVERT/MIRROR INVERT
AUTO POWER ON ON/OFF
TEST SIGNAL OFF/1 - 4
OPTION SXGA PICTURE MOTION/STILL
MENU POSITION UPPER LEFT/LOWER RIGHT
AUTO POWER OFF OFF/5/10/15/30/60min.
VIDEO SIGNAL AUTO/NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
LANGUAGE /English/Español/Deutsch/Français/Italiano/
SIGNAL AUTO AUTO/USER1/USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FYNE SYNC. 0 - 32
TRACKING 0 - 9999
RGB INPUT
HOLD
USER
RGB/YC B C R ,YP B P R
BEGIN -1 - -99
END 1 - 99
CLAMP POSITION 0 - 63
CLAMP WIDTH 0 - 63
HORIZ.PIXELS 0 - 9999
VERT.LINES 0 - 9999
PLL AUTO/FAST/NORMAL/SLOW
VERT.SYNC. AUTO/ON/OFF
SQUEEZE ON/OFF
MEMORIZE
DELETE
RESET
ON
OFF
AUTO
USER1/USER2
USER1/USER2
*
*
*
*
*
*
*
*
*
* : Setting range is different according
to the type of the signal.