MITSUBISHI ELECTRIC LVP-S120A - Manual (Page 8)

8
Overview of the remote control
card auto play
Press to start auto play function of the
PC CARD. See page 24.
The buttons with * mark work as same
as the buttons on the projector.
PC card release
Press this button to be able to eject PC
card. Make sure to press this button all the
time to eject the PC card. See page 23.
* input source
still
Use to freeze the image. See page 22.
* power
right click
This operates in the same way as the right
button on the computer mouse. See page 31.
* direction
auto position
Use to adjust the position of Personal
computer image. See page 16.
* +, - (volume)
* menu
mouse pointer
Use to move the cursor on the image,
instead of the computer mouse. See
page 31.
* enter
ENTER
R-CLICK
LASER
POWER
RGB VIDEO PC CARD
AUTOPLAY RELEASE AUTO
POSITION
MENU
STILL
VOLUME
EXPAND
laser
Pressing the button emits laser beam.
expand
Use to expand the image.
See page 22.
left click
This operates in the same
way as the left button on
the computer mouse. See
page 31.
About laser beam
This remote control is the class 2 (max. output 1mW
laser diode 645nm) laser equipment.
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH : 645nm
MAX OUTPUT : 1mW
CLASS II LASER PRODUCT
CAUTION
CAUTION :
Pressing the LASER button provided remote con-
trol emits laser beam. Do not look into the beam
light directly. Do not point the laser beam to people.
Looking the laser beam directly may lose eyesight.