Magic Chef Garment Steamer - Manual (Page 8)

8
CAUTION:
Always hang the steam nozzle on the steam nozzle holder when
not in use to prevent steam from causing bodily injury or damage
to surfaces.
WARNING:
Do not pull the hose with excessive force or damage will occur
and causing steam leakage. Do not move the appliance by
grasping the hose.
ACCESSORY ASSEMBLY
To attach fabric brush onto the steam nozzle:
Figure 4
1. Turn off the steamer and wait until no steam emits from the steam nozzle.
2. Align the pegs along the back of the accessory with the holes on the steam
nozzle. See Figure 4.
3. Push until the brush is firm in place.
CAUTION:
Do not install the accessory while steam is emitting from the
steam nozzle to avoid burns.
Operating Instructions
1. Unplug the power cord and turn the switch to “OFF” position.
2. Remove the water tank, turn it upside down, and unscrew the valve cap (See
Figure 5). Fill the water tank with cool water and replace the valve cap. Do
not use hot water. To prolong the lifetime of your steamer, it is
recommended to use distilled or de-mineralized water. Place the water tank
back into the unit and make sure it is sitting properly and securely in the