MACKIE SA1232Z User Manual
Page 3
2
3
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .................................................................................................2
INTRODUCTION ........................................................................................................................................3
REAR PANEL DESCRIPTION ....................................................................................................................4
HOOKUP DIAGRAM ..................................................................................................................................5
CONNECTIONS ..........................................................................................................................................5
PLACEMENT ................................................................................................................................................5
THERMAL CONSIDERATIONS ............................................................................................................... 6
AC POWER .................................................................................................................................................. 6
SERVICE INFORMATION ..........................................................................................................................7
Warranty Service ................................................................................................................................................................7
Troubleshooting .................................................................................................................................................................7
Repair .................................................................................................................................................................................... 8
CARE AND MAINTENANCE .................................................................................................................... 8
SA1232z SPECIFICATIONS ........................................................................................................................ 9
SA1232z LIMITED WARRANTY ..............................................................................................................11
for more information about this and other Mackie products.
INTRODUCTION
A male XLR Thru jack is provided for daisy-chaining the
signal to additional SA1232z cabinets.
Three built-in power amplifiers provide 100 watts rms
each for the mid-frequency and high-frequency drivers,
and 1100 watts rms for the low-frequency driver. The
amplifier modules sit on a mammoth aluminum heatsink
that eliminates the need for fans. A tremendous benefit
of having the amplifiers located within the loudspeaker
cabinet is that the SA1232z functions as a system, opti-
mizing acoustic, electronic, and mechanical designs to
achieve the highest level of performance and value.
The rear mounted amplifier assembly features
separate signal and AC power panels separated by the
heatsink. The signal input panel contains:
• an input XLR and loop-through XLR
• a volume level control
• Power ON indicator
• Signal Present indicator
• Limit indicator
• Thermal Protection indicator
The cabinet is constructed using both 18 mm multi-
layered plywood and pressure injected structural resin.
A carrying handle is integrated into each side for easy
loading and transport.
Thank you for choosing Mackie’s active sound reinforce-
ment loudspeaker systems.
The SA1232z is a high-efficiency, extreme output,
horn-loaded, 3-way, wide-dispersion, active sound
reinforcement system. It features a one-piece 90º x 40º
horn, which includes both the mid- and high-frequency
sections in a proprietary optimized Wavefront™ design.
Unlike typical mid/high horn designs, the high-frequency
section is positioned to fire down into the 6-inch mid-
range’s dispersion pattern. This creates a focused, single
wave front with excellent phase and power response
characteristics. The resulting 90º x 40º dispersion pat-
tern provides a very open, natural sound at extreme
output levels.
The 6-inch neodymium mid-range transducer oper-
ates between 700 Hz and 3000 Hz, eliminating the place-
ment of a crossover point in the middle of critical voice
frequencies. Frequencies above 3000 Hz are reproduced
by a 1.75-inch neodymium compression driver. The low
frequencies are produced by two high-output 12-inch
woofers.
Connecting and setting up the SA1232z is a breeze. It
accepts a line-level signal via a female XLR input jack.
Part No. 0013862 Rev. A 12/04
©2004 LOUD Technologies Inc. All Rights Reserved. Printed in China.