M-AUDIO USB - Manual (Page 6)

9. The New Hardware Wizard will write the remaining files to your system. When the
installation is complete, click Finish.
10. After the installation is complete, you may double-click on the M-Audio Transit USB
Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB
Control Panel” for more information on the Control Panel’s features and function.
Windows ME
Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later
installed. The Transit USB installer will automatically check for the correct
version of DirectX and install the latest Direct X update. This update will be
skipped if you already have DirectX version 8.1 (or higher) in your system.
13
E
N
G
L
I
S
H
5. Once the driver files have successfully been installed, the CD Performance
Enhancements screen will appear. By default, the performance enhancement settings for
CD and DVD playback will be selected. It is recommended you leave them selected
unless you are certain that your hardware is incompatible with these settings.
6. If you selected DVD performance enhancements, you will be prompted to restart your
computer. Click Finish and allow your computer to restart.
7. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system
tray. Connect the Transit USB to your computer’s USB port. Windows will display the
Found New Hardware dialog and will open the New Hardware Wizard.
8. Choose “Install the software automatically,” and click Next.
12
E
N
G
L
I
S
H