Audio signal connections – Marantz CDR632 User Manual
Page 11
2 – Front and rear panel—Audio signal connections
11
ENGLISH
D
ERASE button
Performs the same function as the front panel
ERASE/DEL button (
F
).
E
RECORD
button
Performs the same function as the front panel
(record)/TR.INCR. button (
J
).
F
SYNC REC button
Performs the same function as the front panel
SYNC REC/< button (
K
).
G
REC MUTE button
Records approximately four seconds of silence.
After the silence is recorded, the CDR632 will
enter record-ready mode (
→ p.30).
H
SEARCH ,
buttons
Search through the disc forward (
) or back-
ward (
).
I
SKIP ,
buttons
Perform the same function as turning the front
panel MULTI JOG dial (
A
).
J
STOP
button
Performs the same function as the front panel
(stop) button (
G
).
K
PAUSE
button
Performs the same function as the front panel
(pause) button (
I
).
L
PLAY
button
Performs the same function as the front panel
(play) button (
H
).
Audio signal connections
Input
Only the input jack(s) selected by the front panel
INPUT SELECT (
6
) button will be used.
Choose one of the following three sets of input jacks,
and make the appropriate connections.
• ANALOG IN (UNBALANCED) jacks L/R (
M
)
• DIGITAL IN (COAXIAL) jack (
O
)
• DIGITAL IN (OPTICAL) jack (
P
)
The display indicates the currently selected input
jack(s) (
→ p.24).
Output
Signals are output from all of the following three sets
of output jacks. Connect the desired set(s) of output
jacks.
• ANALOG OUT (UNBALANCED) jacks L/R
(
N
)
• DIGITAL OUT (COAXIAL) jack (
O
)
• DIGITAL OUT (OPTICAL) jack (
P
)