Micro Technic Micronix PV-5127 User Manual
Page 29
Users Manual & Installation Guide
PV- 5127:
Power supply module with UPS
Page 29 of 31
KL2
Connection of mains and battery voltage are made via KL2 as shown in the table:
Connection in KL2
Function
1
Mains+ in
2
Mains- in
3
Battery- in
4
Battery+ in
Connect mains input to pin 1 and 2. To use a lead-acid backup battery, connect it to pin 3 and 4,
otherwise leave pin 3 and 4 unconnected. To use a NiMH (Nickel Metal Hydride) battery for back-
up, a Micronix PV-1075 can be integrated in the PC/104 stack. In this case, see documentation
supplied with PV-1075 for connection of mains and battery.
KL3
Output power can be supplied from connector KL3. This should be used if the output current
exceeds the PC/104 connector limits, see section PC/104 connector (CN1), or if you need power for
devices that are not powered through the PC/104 bus.
Connection number in KL3 Function
1
GND
2
GND
3
+12V out
4
+5V out
5
+5V out
*
+,
*
*
+,
*
+,
#
$*
+,
-
.
/
/
0
1
2
(
'
#
"-
*
*
34#
*
5
3
!
"
(
6
7
7
7
1
'
8
/49
=
' 7
'
&
$( &