Marmitek SD833 - Manual (Page 3)

SD833 2
SAFETY WARNINGS
• The SD833 smoke detector is designed specifically for localised home use. If
smoke is detected, the appliance will sound a piercing alarm. Make sure the smoke
detector is installed in such a way that the built-in siren will be heard by residents
even when they are asleep. If necessary, install several smoke detectors. For
additional functionality, you can also use the smoke detector in combination with
Marmitek ProGuard800 security system. Attention: the operation of this additional
function is not included in the manufacturer's liability.
• This product is not a toy. Keep out of reach of children.
• Check the detector every week to make sure it is in proper working order.
• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures
or bright light sources.
• The product should only be repaired or serviced by a qualified repairman.
• In case of improper usage or if you have, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• Keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
INTRODUCTION
The SD833 is a brand-name smoke detector with an integrated Marmitek
transmitter. The SD833 Smoke Detector is for use with the Marmitek ProGuard800
systems. When you wish to know more about the complete system, its possibilities
and its settings, then you can check out the installation manual or visit
www.marmitek.com.
1. GENERAL INFORMATION AND FUNCTION
The smoke detector can detect incipient low temperature fires and open fires with
smoke development. The smoke detector operates by the optical principle. There
are no radioactive substances in this detector.
The smoke detector incorporates the following features:
• It monitors rooms for the development of smoke.
• It has an integrated signal transmitter to trigger a Marmitek ProGuard800 Security
system.